Zx Spectrum Vga -

| Pin | Signal | Description | |-----|--------|----------------------| | 1 | GND | Ground | | 3 | +5V | Power | | 15 | RED | TTL (0/5V) | | 16 | GREEN | TTL | | 17 | BLUE | TTL | | 18 | CSYNC | Composite sync (TTL) |

Example for red channel:

.program vga_generator wrap_target ; Wait for next pixel clock edge wait 1 gpio 0 ; Output pixel data (R,G,B) from SRAM buffer via DMA out pins, 3 ; Generate H-sync pulse ... wrap zx spectrum vga

// Pseudo-code for RP2040 frame buffer VGA converter uint8_t framebuffer[192][256]; // 8-bit color volatile bool frame_ready = false; void capture_frame() // Wait for VSYNC from Spectrum while(gpio_get(HSYNC_PIN)); for (int y=0; y<192; y++) for (int x=0; x<256; x++) // Sample RGB at ~7 MHz uint8_t r = gpio_get(R_PIN); uint8_t g = gpio_get(G_PIN); uint8_t b = gpio_get(B_PIN); framebuffer[y][x] = (r<<2) For a clean VGA conversion, use a 128K

| Region | Lines | |---------------|--------| | V-sync pulse | 2 | | Back porch | 33 | | Active video | 480 | | Front porch | 10 | | Total | 525 | For a clean VGA conversion

| Region | Pixels | Time @ 25.175 MHz | |---------------|--------|-------------------| | H-sync pulse | 96 | 3.81 µs | | Back porch | 48 | 1.91 µs | | Active video | 640 | 25.42 µs | | Front porch | 16 | 0.64 µs | | Total | 800 | 31.78 µs (31.47 kHz) |

The 48K Spectrum only has composite. The 128K models provide separate TTL-level RGB signals (0V = black, +5V = full intensity) and composite sync on the edge connector. For a clean VGA conversion, use a 128K model or add a composite-to-RGB decoder (e.g., using a LM1881 sync separator). | Parameter | Value | Tolerance | |------------------|---------------------------|-------------| | Horizontal scan | 31.46875 kHz | ±500 Hz | | Vertical scan | 59.94 Hz | ±0.5% | | Pixel clock | 25.175 MHz | ±0.5% | | H-sync polarity | Negative | | | V-sync polarity | Negative | | | Active pixels | 640 | | | Active lines | 480 | |