Hard Reset Zeblaze Stratos 3 -

On your phone , go to Settings > Bluetooth . Step 2: Find "Zeblaze Stratos 3" in the list of paired devices. Tap it and select "Forget" or "Unpair" . Step 3: Open the GloryFit app (or whichever app you use – Zeblaze often uses GloryFit, Launcher, or a custom app). Step 4: Go to Device tab > Add device . Step 5: Select Zeblaze Stratos 3 from the list and complete pairing. Step 6: If the watch asks to "Restore backup" or "Set as new device," choose Set as new device . Troubleshooting: Hard Reset Not Working? | Issue | Solution | |-------|----------| | Watch won't turn on after reset | Charge for 2+ hours using the original magnetic charger. | | Watch is still paired to old phone | Go to phone Bluetooth settings and manually forget the device. | | Buttons do nothing during Method 2 | Your firmware may have a different combo. Try: Hold Upper Right button only for 30 seconds, then release, then immediately press and hold Upper + Lower together. | | Data is still there | You performed a soft reboot, not a hard reset. Repeat Method 1 or ensure you selected "wipe data/factory reset" in recovery. | Quick Summary (Cheat Sheet) | Situation | Action | |-----------|--------| | Watch working | Settings > System > Reset > Confirm | | Watch frozen | Hold Upper Right button 20 sec to force reboot, then use Settings | | Watch won't boot | Try button combo (Lower Right first, then Upper) to reach recovery mode |

Press and hold the Upper Right button for about 15–20 seconds. The screen may go black. Keep holding until you see the Zeblaze logo appear, then release. This is a forced reboot , but it may not always wipe data.

Scroll down and tap System (or sometimes More Settings > System ). Hard Reset ZEBLAZE Stratos 3

The watch will restart. It will now be in a "like-new" state. Method 2: Hard Reset via Hardware Buttons (If the watch is frozen, unresponsive, or stuck on a logo) Use this method if the touchscreen doesn’t work or the watch won’t boot normally.

After the hard reset, your Zeblaze Stratos 3 will run faster, clear up storage, and resolve most persistent software glitches or sync issues. On your phone , go to Settings > Bluetooth

Make sure the watch has battery (plug it into the charger for 10 minutes if unsure).

You will see a confirmation message: "Erase all data & reset?" Tap the checkmark (✓) or Confirm . Step 3: Open the GloryFit app (or whichever

Wake the watch by pressing the Upper Right button (crown).