Gyroscope Sensor Library For Proteus [2027]

// Handle I2C Read request from MCU BYTE I2C_Read(BYTE reg) return i2c_buffer[reg];

public: // Simulates user input via mouse drag or sliders void Simulate(void) // In a real library, you would read a "Rotational Matrix" from Proteus's 3D viewer. // For this draft, we generate a sine wave to test filter algorithms. angularX = sin(GetSimulationTime() * 2) * 250; // +/- 250 deg/sec angularY = cos(GetSimulationTime() * 1.5) * 100; angularZ = 0; gyroscope sensor library for proteus

// Update I2C registers (WHO_AM_I, GYRO_XOUT_H, etc.) i2c_buffer[0x75] = 0x68; // Who Am I i2c_buffer[0x43] = (int)(angularX * 65.5) >> 8; // High byte i2c_buffer[0x44] = (int)(angularX * 65.5) & 0xFF; // Low byte // Handle I2C Read request from MCU BYTE

Introduction Proteus is a powerful tool for microcontroller simulation, but its built-in sensor library is somewhat limited. While it excels at LEDs, ADCs, and motor drivers, you won’t find a native Gyroscope Sensor (like MPU6050 or L3GD20) in the standard pick list. While it excels at LEDs, ADCs, and motor