Easycwmp Tutorial May 2026

Not natively – only HTTP/S.

# In /etc/config/easycwmp config connection_request option interface 'eth0' option port '7548' option path '/' Start the Backend Daemon (easycwmpd) sudo easycwmpd -f -d # foreground + debug mode Or run as a service:

easycwmpd is the persistent daemon that handles connection requests and periodic informs. The easycwmp script is a CLI tool that sends RPCs via the daemon. easycwmp tutorial

# Force an Inform immediately easycwmp inform easycwmp download Reboot the device (if allowed by ACS) easycwmp reboot Factory reset easycwmp factoryreset Show current parameters easycwmp get parameter name Device.DeviceInfo.SerialNumber 6. Testing with GenieACS (Local ACS) To fully test EasyCWMp, you need an ACS. Let’s set up GenieACS quickly. Step 1: Install GenieACS # Using Docker (easiest) docker run -d --name genieacs -p 7547:7547 -p 3000:3000 genieacs/genieacs Step 2: Access GenieACS UI Open http://localhost:3000 – default credentials: admin / admin Step 3: Configure EasyCWMp to Use GenieACS Edit /etc/config/easycwmp :

config local 'local' option interface 'eth0' # network interface option port '7548' # for connection requests uuidgen > /etc/easycwmp/serial Configure ACS Connection Request Handling EasyCWMp must listen for incoming requests from the ACS. This is typically done via iptables or by binding to a specific port. Not natively – only HTTP/S

config acs 'general' option acs_url 'https://your-acs-server.com:7547/' option periodic_interval '3600' # seconds option periodic_enable '1' option retry_interval '30' # seconds option connection_request_username 'admin' option connection_request_password 'secret' option ssl_verify_host '0' # disable for self-signed certs option ssl_verify_path '0' config device 'device' option manufacturer 'MyCompany' option manufacturer_oui '001234' option product_class 'MyRouterV1' option serial_number 'SN1234567890' option hardware_version '1.0' option software_version '1.0.0'

option acs_url 'https://primary.acs.com' option backup_acs_url 'https://backup.acs.com' Create a script for vendor-specific RPC methods in /usr/lib/easycwmp/rpc/ : # Force an Inform immediately easycwmp inform easycwmp

# Build OpenWrt with easycwmp package make menuconfig # select easycwmp make flash router